#include <spectracyber.h>

Inheritance diagram for SpectraCyber:

Collaboration diagram for SpectraCyber:

Public Types
enum	SpectrometerCommand { IF_GAIN, CONT_GAIN, SPEC_GAIN, CONT_TIME, SPEC_TIME, NOISE_SOURCE, CONT_OFFSET, SPEC_OFFSET, RECV_FREQ, READ_CHANNEL, BANDWIDTH, RESET }

enum	SpectrometerChannel { CONTINUUM_CHANNEL, SPECTRAL_CHANNEL }

enum	SpectrometerError { NO_ERROR, BAUD_RATE_ERROR, FLASH_MEMORY_ERROR, WRONG_COMMAND_ERROR, WRONG_PARAMETER_ERROR, FATAL_ERROR }

Public Types inherited from INDI::BaseDevice
enum	INDI_ERROR { INDI_DEVICE_NOT_FOUND = -1, INDI_PROPERTY_INVALID = -2, INDI_PROPERTY_DUPLICATED = -3, INDI_DISPATCH_ERROR = -4, INDI_DEVICE_NOT_FOUND = -1, INDI_PROPERTY_INVALID = -2, INDI_PROPERTY_DUPLICATED = -3, INDI_DISPATCH_ERROR = -4 }

enum	DRIVER_INTERFACE { GENERAL_INTERFACE = 0, TELESCOPE_INTERFACE = (1 << 0), CCD_INTERFACE = (1 << 1), GUIDER_INTERFACE = (1 << 2), FOCUSER_INTERFACE = (1 << 3), FILTER_INTERFACE = (1 << 4), DOME_INTERFACE = (1 << 5), GPS_INTERFACE = (1 << 6), WEATHER_INTERFACE = (1 << 7), AO_INTERFACE = (1 << 8), DUSTCAP_INTERFACE = (1 << 9), LIGHTBOX_INTERFACE = (1 << 10), DETECTOR_INTERFACE = (1 << 11), ROTATOR_INTERFACE = (1 << 12), SPECTROGRAPH_INTERFACE = (1 << 13), AUX_INTERFACE = (1 << 15), GENERAL_INTERFACE = 0, TELESCOPE_INTERFACE = (1 << 0), CCD_INTERFACE = (1 << 1), GUIDER_INTERFACE = (1 << 2), FOCUSER_INTERFACE = (1 << 3), FILTER_INTERFACE = (1 << 4), DOME_INTERFACE = (1 << 5), GPS_INTERFACE = (1 << 6), WEATHER_INTERFACE = (1 << 7), AO_INTERFACE = (1 << 8), DUSTCAP_INTERFACE = (1 << 9), LIGHTBOX_INTERFACE = (1 << 10), DETECTOR_INTERFACE = (1 << 11), ROTATOR_INTERFACE = (1 << 12), SPECTROGRAPH_INTERFACE = (1 << 13), AUX_INTERFACE = (1 << 15) }
	The DRIVER_INTERFACE enum defines the class of devices the driver implements. More...

enum	INDI_ERROR { INDI_DEVICE_NOT_FOUND = -1, INDI_PROPERTY_INVALID = -2, INDI_PROPERTY_DUPLICATED = -3, INDI_DISPATCH_ERROR = -4, INDI_DEVICE_NOT_FOUND = -1, INDI_PROPERTY_INVALID = -2, INDI_PROPERTY_DUPLICATED = -3, INDI_DISPATCH_ERROR = -4 }

enum	DRIVER_INTERFACE { GENERAL_INTERFACE = 0, TELESCOPE_INTERFACE = (1 << 0), CCD_INTERFACE = (1 << 1), GUIDER_INTERFACE = (1 << 2), FOCUSER_INTERFACE = (1 << 3), FILTER_INTERFACE = (1 << 4), DOME_INTERFACE = (1 << 5), GPS_INTERFACE = (1 << 6), WEATHER_INTERFACE = (1 << 7), AO_INTERFACE = (1 << 8), DUSTCAP_INTERFACE = (1 << 9), LIGHTBOX_INTERFACE = (1 << 10), DETECTOR_INTERFACE = (1 << 11), ROTATOR_INTERFACE = (1 << 12), SPECTROGRAPH_INTERFACE = (1 << 13), AUX_INTERFACE = (1 << 15), GENERAL_INTERFACE = 0, TELESCOPE_INTERFACE = (1 << 0), CCD_INTERFACE = (1 << 1), GUIDER_INTERFACE = (1 << 2), FOCUSER_INTERFACE = (1 << 3), FILTER_INTERFACE = (1 << 4), DOME_INTERFACE = (1 << 5), GPS_INTERFACE = (1 << 6), WEATHER_INTERFACE = (1 << 7), AO_INTERFACE = (1 << 8), DUSTCAP_INTERFACE = (1 << 9), LIGHTBOX_INTERFACE = (1 << 10), DETECTOR_INTERFACE = (1 << 11), ROTATOR_INTERFACE = (1 << 12), SPECTROGRAPH_INTERFACE = (1 << 13), AUX_INTERFACE = (1 << 15) }
	The DRIVER_INTERFACE enum defines the class of devices the driver implements. More...

Public Member Functions
	SpectraCyber ()

virtual void	ISGetProperties (const char *dev) override
	define the driver's properties to the client. More...

virtual bool	ISNewNumber (const char dev, const char name, double values[], char *names[], int n) override
	Process the client newNumber command. More...

virtual bool	ISNewText (const char dev, const char name, char texts[], char names[], int n) override
	Process the client newSwitch command. More...

virtual bool	ISNewSwitch (const char dev, const char name, ISState states, char names[], int n) override
	Process the client newSwitch command. More...

virtual bool	ISSnoopDevice (XMLEle *root) override
	Process a snoop event from INDI server. More...

Public Member Functions inherited from INDI::DefaultDevice
	DefaultDevice ()

virtual	~DefaultDevice ()

void	addAuxControls ()
	Add Debug, Simulation, and Configuration options to the driver. More...

void	addDebugControl ()
	Add Debug control to the driver. More...

void	addSimulationControl ()
	Add Simulation control to the driver. More...

void	addConfigurationControl ()
	Add Configuration control to the driver. More...

void	addPollPeriodControl ()
	Add Polling period control to the driver. More...

void	resetProperties ()
	Set all properties to IDLE state. More...

void	defineNumber (INumberVectorProperty *nvp)
	Define number vector to client & register it. More...

void	defineText (ITextVectorProperty *tvp)
	Define text vector to client & register it. More...

void	defineSwitch (ISwitchVectorProperty *svp)
	Define switch vector to client & register it. More...

void	defineLight (ILightVectorProperty *lvp)
	Define light vector to client & register it. More...

void	defineBLOB (IBLOBVectorProperty *bvp)
	Define BLOB vector to client & register it. More...

virtual bool	deleteProperty (const char *propertyName)
	Delete a property and unregister it. More...

virtual void	setConnected (bool status, IPState state=IPS_OK, const char *msg=nullptr)
	Set connection switch status in the client. More...

int	SetTimer (uint32_t ms)
	Set a timer to call the function TimerHit after ms milliseconds. More...

void	RemoveTimer (int id)
	Remove timer added with SetTimer. More...

virtual const char *	getDriverExec ()

virtual const char *	getDriverName ()

void	setVersion (uint16_t vMajor, uint16_t vMinor)
	Set driver version information to be defined in DRIVER_INFO property as vMajor.vMinor. More...

uint16_t	getMajorVersion ()

uint16_t	getMinorVersion ()

virtual bool	ISNewBLOB (const char dev, const char name, int sizes[], int blobsizes[], char blobs[], char formats[], char *names[], int n)
	Process the client newBLOB command. More...

virtual uint16_t	getDriverInterface ()

void	setDriverInterface (uint16_t value)
	setInterface Set driver interface. More...

	DefaultDevice ()

virtual	~DefaultDevice ()

void	addAuxControls ()
	Add Debug, Simulation, and Configuration options to the driver. More...

void	addDebugControl ()
	Add Debug control to the driver. More...

void	addSimulationControl ()
	Add Simulation control to the driver. More...

void	addConfigurationControl ()
	Add Configuration control to the driver. More...

void	addPollPeriodControl ()
	Add Polling period control to the driver. More...

void	resetProperties ()
	Set all properties to IDLE state. More...

void	defineNumber (INumberVectorProperty *nvp)
	Define number vector to client & register it. More...

void	defineText (ITextVectorProperty *tvp)
	Define text vector to client & register it. More...

void	defineSwitch (ISwitchVectorProperty *svp)
	Define switch vector to client & register it. More...

void	defineLight (ILightVectorProperty *lvp)
	Define light vector to client & register it. More...

void	defineBLOB (IBLOBVectorProperty *bvp)
	Define BLOB vector to client & register it. More...

virtual bool	deleteProperty (const char *propertyName)
	Delete a property and unregister it. More...

virtual void	setConnected (bool status, IPState state=IPS_OK, const char *msg=nullptr)
	Set connection switch status in the client. More...

int	SetTimer (uint32_t ms)
	Set a timer to call the function TimerHit after ms milliseconds. More...

void	RemoveTimer (int id)
	Remove timer added with SetTimer. More...

virtual const char *	getDriverExec ()

virtual const char *	getDriverName ()

void	setVersion (uint16_t vMajor, uint16_t vMinor)
	Set driver version information to be defined in DRIVER_INFO property as vMajor.vMinor. More...

uint16_t	getMajorVersion ()

uint16_t	getMinorVersion ()

virtual bool	ISNewBLOB (const char dev, const char name, int sizes[], int blobsizes[], char blobs[], char formats[], char *names[], int n)
	Process the client newBLOB command. More...

virtual uint16_t	getDriverInterface ()

void	setDriverInterface (uint16_t value)
	setInterface Set driver interface. More...

Public Member Functions inherited from INDI::BaseDevice
	BaseDevice ()

virtual	~BaseDevice ()

INumberVectorProperty *	getNumber (const char *name)

ITextVectorProperty *	getText (const char *name)

ISwitchVectorProperty *	getSwitch (const char *name)

ILightVectorProperty *	getLight (const char *name)

IBLOBVectorProperty *	getBLOB (const char *name)

IPState	getPropertyState (const char *name)

IPerm	getPropertyPermission (const char *name)

void	registerProperty (void *p, INDI_PROPERTY_TYPE type)

int	removeProperty (const char name, char errmsg)
	Remove a property. More...

void *	getRawProperty (const char *name, INDI_PROPERTY_TYPE type=INDI_UNKNOWN)
	Return a property and its type given its name. More...

INDI::Property *	getProperty (const char *name, INDI_PROPERTY_TYPE type=INDI_UNKNOWN)
	Return a property and its type given its name. More...

std::vector< INDI::Property * > *	getProperties ()
	Return a list of all properties in the device. More...

bool	buildSkeleton (const char *filename)
	Build driver properties from a skeleton file. More...

bool	isConnected ()

void	setDeviceName (const char *dev)
	Set the device name. More...

const char *	getDeviceName ()

void	addMessage (const std::string &msg)
	Add message to the driver's message queue. More...

void	checkMessage (XMLEle *root)

void	doMessage (XMLEle *msg)

std::string	messageQueue (int index) const

std::string	lastMessage ()

void	setMediator (INDI::BaseMediator *med)
	Set the driver's mediator to receive notification of news devices and updated property values. More...

INDI::BaseMediator *	getMediator ()

const char *	getDriverName ()

const char *	getDriverExec ()

const char *	getDriverVersion ()

	BaseDevice ()

virtual	~BaseDevice ()

INumberVectorProperty *	getNumber (const char *name)

ITextVectorProperty *	getText (const char *name)

ISwitchVectorProperty *	getSwitch (const char *name)

ILightVectorProperty *	getLight (const char *name)

IBLOBVectorProperty *	getBLOB (const char *name)

IPState	getPropertyState (const char *name)

IPerm	getPropertyPermission (const char *name)

void	registerProperty (void *p, INDI_PROPERTY_TYPE type)

int	removeProperty (const char name, char errmsg)
	Remove a property. More...

void *	getRawProperty (const char *name, INDI_PROPERTY_TYPE type=INDI_UNKNOWN)
	Return a property and its type given its name. More...

INDI::Property *	getProperty (const char *name, INDI_PROPERTY_TYPE type=INDI_UNKNOWN)
	Return a property and its type given its name. More...

std::vector< INDI::Property * > *	getProperties ()
	Return a list of all properties in the device. More...

bool	buildSkeleton (const char *filename)
	Build driver properties from a skeleton file. More...

bool	isConnected ()

void	setDeviceName (const char *dev)
	Set the device name. More...

const char *	getDeviceName ()

void	addMessage (const std::string &msg)
	Add message to the driver's message queue. More...

void	checkMessage (XMLEle *root)

void	doMessage (XMLEle *msg)

std::string	messageQueue (int index) const

std::string	lastMessage ()

void	setMediator (INDI::BaseMediator *med)
	Set the driver's mediator to receive notification of news devices and updated property values. More...

INDI::BaseMediator *	getMediator ()

const char *	getDriverName ()

const char *	getDriverExec ()

const char *	getDriverVersion ()

Protected Member Functions
virtual const char *	getDefaultName () override

virtual bool	Connect () override
	Connect to the device. More...

virtual bool	Disconnect () override
	Disconnect from device. More...

virtual void	TimerHit () override
	Callback function to be called once SetTimer duration elapses. More...

bool	update_freq (double nFreq)

Protected Member Functions inherited from INDI::DefaultDevice
void	setDynamicPropertiesBehavior (bool defineEnabled, bool deleteEnabled)
	setDynamicPropertiesBehavior controls handling of dynamic properties. More...

virtual bool	loadConfig (bool silent=false, const char *property=nullptr)
	Load the last saved configuration file. More...

virtual bool	saveConfig (bool silent=false, const char *property=nullptr)
	Save the current properties in a configuration file. More...

virtual bool	saveConfigItems (FILE *fp)
	saveConfigItems Save specific properties in the provide config file handler. More...

virtual bool	saveAllConfigItems (FILE *fp)
	saveAllConfigItems Save all the drivers' properties in the configuration file More...

virtual bool	loadDefaultConfig ()
	Load the default configuration file. More...

void	setDebug (bool enable)
	Toggle driver debug status A driver can be more verbose if Debug option is enabled by the client. More...

void	setSimulation (bool enable)
	Toggle driver simulation status A driver can run in simulation mode if Simulation option is enabled by the client. More...

virtual void	debugTriggered (bool enable)
	Inform driver that the debug option was triggered. More...

virtual void	simulationTriggered (bool enable)
	Inform driver that the simulation option was triggered. More...

bool	isDebug ()

bool	isSimulation ()

virtual bool	updateProperties ()
	updateProperties is called whenever there is a change in the CONNECTION status of the driver. More...

void	registerConnection (Connection::Interface *newConnection)
	registerConnection Add new connection plugin to the existing connection pool. More...

bool	unRegisterConnection (Connection::Interface *existingConnection)
	unRegisterConnection Remove connection from existing pool More...

Connection::Interface *	getActiveConnection ()

void	setDefaultPollingPeriod (uint32_t period)

uint32_t	getPollingPeriod ()

void	setDynamicPropertiesBehavior (bool defineEnabled, bool deleteEnabled)
	setDynamicPropertiesBehavior controls handling of dynamic properties. More...

virtual bool	loadConfig (bool silent=false, const char *property=nullptr)
	Load the last saved configuration file. More...

virtual bool	saveConfig (bool silent=false, const char *property=nullptr)
	Save the current properties in a configuration file. More...

virtual bool	saveConfigItems (FILE *fp)
	saveConfigItems Save specific properties in the provide config file handler. More...

virtual bool	saveAllConfigItems (FILE *fp)
	saveAllConfigItems Save all the drivers' properties in the configuration file More...

virtual bool	loadDefaultConfig ()
	Load the default configuration file. More...

void	setDebug (bool enable)
	Toggle driver debug status A driver can be more verbose if Debug option is enabled by the client. More...

void	setSimulation (bool enable)
	Toggle driver simulation status A driver can run in simulation mode if Simulation option is enabled by the client. More...

virtual void	debugTriggered (bool enable)
	Inform driver that the debug option was triggered. More...

virtual void	simulationTriggered (bool enable)
	Inform driver that the simulation option was triggered. More...

bool	isDebug ()

bool	isSimulation ()

virtual bool	updateProperties ()
	updateProperties is called whenever there is a change in the CONNECTION status of the driver. More...

void	registerConnection (Connection::Interface *newConnection)
	registerConnection Add new connection plugin to the existing connection pool. More...

bool	unRegisterConnection (Connection::Interface *existingConnection)
	unRegisterConnection Remove connection from existing pool More...

Connection::Interface *	getActiveConnection ()

void	setDefaultPollingPeriod (uint32_t period)

uint32_t	getPollingPeriod ()

Protected Member Functions inherited from INDI::BaseDevice
int	buildProp (XMLEle root, char errmsg)
	Build a property given the supplied XML element (defXXX) More...

int	setValue (XMLEle root, char errmsg)
	handle SetXXX commands from client More...

int	setBLOB (IBLOBVectorProperty pp, XMLEle root, char *errmsg)
	Parse and store BLOB in the respective vector. More...

int	buildProp (XMLEle root, char errmsg)
	Build a property given the supplied XML element (defXXX) More...

int	setValue (XMLEle root, char errmsg)
	handle SetXXX commands from client More...

int	setBLOB (IBLOBVectorProperty pp, XMLEle root, char *errmsg)
	Parse and store BLOB in the respective vector. More...

Private Member Functions
virtual bool	initProperties () override
	Initilize properties initial state and value. More...

bool	init_spectrometer ()

void	abort_scan ()

bool	read_channel ()

bool	dispatch_command (SpectrometerCommand command)

int	get_on_switch (ISwitchVectorProperty *sp)

bool	reset ()

Private Attributes
INumberVectorProperty *	FreqNP

INumberVectorProperty *	ScanNP

ISwitchVectorProperty *	ScanSP

ISwitchVectorProperty *	ChannelSP

IBLOBVectorProperty *	DataStreamBP

IText *	telescopeID

INumber	EquatorialCoordsRN [2]

INumberVectorProperty	EquatorialCoordsRNP

std::string	type_name

std::string	default_port

int	fd

char	bLine [MAXBLEN]

char	command [5]

double	start_freq

double	target_freq

double	sample_rate

double	JD

double	chanValue

Additional Inherited Members
Protected Attributes inherited from INDI::DefaultDevice
uint32_t	POLLMS = 1000
	Period in milliseconds to call TimerHit(). Default 1000 ms. More...

Member Enumeration Documentation

◆ SpectrometerChannel

enum SpectraCyber::SpectrometerChannel

Enumerator
CONTINUUM_CHANNEL
SPECTRAL_CHANNEL

◆ SpectrometerCommand

enum SpectraCyber::SpectrometerCommand

Enumerator
IF_GAIN
CONT_GAIN
SPEC_GAIN
CONT_TIME
SPEC_TIME
NOISE_SOURCE
CONT_OFFSET
SPEC_OFFSET
RECV_FREQ
READ_CHANNEL
BANDWIDTH
RESET

◆ SpectrometerError

enum SpectraCyber::SpectrometerError

Enumerator
NO_ERROR
BAUD_RATE_ERROR
FLASH_MEMORY_ERROR
WRONG_COMMAND_ERROR
WRONG_PARAMETER_ERROR
FATAL_ERROR

Constructor & Destructor Documentation

◆ SpectraCyber()

SpectraCyber::SpectraCyber ( )

Member Function Documentation

◆ abort_scan()

void SpectraCyber::abort_scan ( )

private

◆ Connect()

bool SpectraCyber::Connect ( )

overrideprotectedvirtual

Connect to the device.

INDI::DefaultDevice implementation connects to appropriate connection interface (Serial or TCP) governed by connectionMode. If connection is successful, it proceed to call Handshake() function to ensure communication with device is successful. For other communication interface, override the method in the child class implementation

Returns: True if connection is successful, false otherwise

Reimplemented from INDI::DefaultDevice.

◆ Disconnect()

bool SpectraCyber::Disconnect ( )

overrideprotectedvirtual

Disconnect from device.

Returns: True if successful, false otherwise

Reimplemented from INDI::DefaultDevice.

◆ dispatch_command()

bool SpectraCyber::dispatch_command ( SpectrometerCommand command )

private

◆ get_on_switch()

int SpectraCyber::get_on_switch ( ISwitchVectorProperty * sp )

private

◆ getDefaultName()

const char * SpectraCyber::getDefaultName ( )

overrideprotectedvirtual

Returns: Default name of the device.

Implements INDI::DefaultDevice.

◆ init_spectrometer()

bool SpectraCyber::init_spectrometer ( )

private

◆ initProperties()

bool SpectraCyber::initProperties ( )

overrideprivatevirtual

Initilize properties initial state and value.

The child class must implement this function.

Returns: True if initilization is successful, false otherwise.

Reimplemented from INDI::DefaultDevice.

◆ ISGetProperties()

void SpectraCyber::ISGetProperties ( const char * dev )

overridevirtual

define the driver's properties to the client.

Usually, only a minimum set of properties are defined to the client in this function if the device is in disconnected state. Those properties should be enough to enable the client to establish a connection to the device. In addition to CONNECT/DISCONNECT, such properties may include port name, IP address, etc. You should check if the device is already connected, and if this is true, then you must define the remainder of the the properties to the client in this function. Otherwise, the remainder of the driver's properties are defined to the client in updateProperties() function which is called when a client connects/disconnects from a device.

Parameters

dev	name of the device

Note: This function is called by the INDI framework, do not call it directly. See LX200 Generic driver for an example implementation

Reimplemented from INDI::DefaultDevice.

◆ ISNewNumber()

bool SpectraCyber::ISNewNumber	(	const char *	dev,
		const char *	name,
		double	values[],
		char *	names[],
		int	n
	)

overridevirtual

Process the client newNumber command.

Note: This function is called by the INDI framework, do not call it directly.

Returns: True if any property was successfully processed, false otherwise.

Reimplemented from INDI::DefaultDevice.

◆ ISNewSwitch()

bool SpectraCyber::ISNewSwitch	(	const char *	dev,
		const char *	name,
		ISState *	states,
		char *	names[],
		int	n
	)

overridevirtual

Process the client newSwitch command.

Note: This function is called by the INDI framework, do not call it directly.

Returns: True if any property was successfully processed, false otherwise.

Reimplemented from INDI::DefaultDevice.

◆ ISNewText()

bool SpectraCyber::ISNewText	(	const char *	dev,
		const char *	name,
		char *	texts[],
		char *	names[],
		int	n
	)

overridevirtual

Process the client newSwitch command.

Note: This function is called by the INDI framework, do not call it directly.

Returns: True if any property was successfully processed, false otherwise.

Reimplemented from INDI::DefaultDevice.

◆ ISSnoopDevice()

bool SpectraCyber::ISSnoopDevice ( XMLEle * root )

overridevirtual

Process a snoop event from INDI server.

This function is called when a snooped property is updated in a snooped driver.

Note: This function is called by the INDI framework, do not call it directly.

Returns: True if any property was successfully processed, false otherwise.

Reimplemented from INDI::DefaultDevice.

◆ read_channel()

bool SpectraCyber::read_channel ( )

private

◆ reset()

bool SpectraCyber::reset ( )

private

◆ TimerHit()

void SpectraCyber::TimerHit ( )

overrideprotectedvirtual

Callback function to be called once SetTimer duration elapses.

Reimplemented from INDI::DefaultDevice.

◆ update_freq()

bool SpectraCyber::update_freq ( double nFreq )

protected

Member Data Documentation

◆ bLine

char SpectraCyber::bLine[MAXBLEN]

private

◆ ChannelSP

ISwitchVectorProperty* SpectraCyber::ChannelSP

private

◆ chanValue

double SpectraCyber::chanValue

private

◆ command

char SpectraCyber::command[5]

private

◆ DataStreamBP

IBLOBVectorProperty* SpectraCyber::DataStreamBP

private

◆ default_port

std::string SpectraCyber::default_port

private

◆ EquatorialCoordsRN

INumber SpectraCyber::EquatorialCoordsRN[2]

private

◆ EquatorialCoordsRNP

INumberVectorProperty SpectraCyber::EquatorialCoordsRNP

private

◆ fd

int SpectraCyber::fd

private

◆ FreqNP

INumberVectorProperty* SpectraCyber::FreqNP

private

◆ JD

double SpectraCyber::JD

private

◆ sample_rate

double SpectraCyber::sample_rate

private

◆ ScanNP

INumberVectorProperty* SpectraCyber::ScanNP

private

◆ ScanSP

ISwitchVectorProperty* SpectraCyber::ScanSP

private

◆ start_freq

double SpectraCyber::start_freq

private

◆ target_freq

double SpectraCyber::target_freq

private

◆ telescopeID

IText* SpectraCyber::telescopeID

private

◆ type_name

std::string SpectraCyber::type_name

private

The documentation for this class was generated from the following files:

ln/3rdparty/src/indilib/indi-1.7.4/3rdparty/indi-spectracyber/spectracyber.h
ln/3rdparty/src/indilib/indi-1.7.4/3rdparty/indi-spectracyber/spectracyber.cpp

Public Types

Public Member Functions

Protected Member Functions

Private Member Functions

Private Attributes

Additional Inherited Members

Member Enumeration Documentation

◆ SpectrometerChannel

◆ SpectrometerCommand

◆ SpectrometerError

Constructor & Destructor Documentation

◆ SpectraCyber()

Member Function Documentation

◆ abort_scan()

◆ Connect()

◆ Disconnect()

◆ dispatch_command()

◆ get_on_switch()

◆ getDefaultName()

◆ init_spectrometer()

◆ initProperties()

◆ ISGetProperties()

◆ ISNewNumber()

◆ ISNewSwitch()

◆ ISNewText()

◆ ISSnoopDevice()

◆ read_channel()

◆ reset()

◆ TimerHit()

◆ update_freq()

Member Data Documentation

◆ bLine

◆ ChannelSP

◆ chanValue

◆ command

◆ DataStreamBP

◆ default_port

◆ EquatorialCoordsRN

◆ EquatorialCoordsRNP

◆ fd

◆ FreqNP

◆ JD

◆ sample_rate

◆ ScanNP

◆ ScanSP

◆ start_freq

◆ target_freq

◆ telescopeID

◆ type_name