The AstrometryDriver class is an INDI driver frontend for astrometry.net. More...

#include <astrometrydriver.h>

Inheritance diagram for AstrometryDriver:

Collaboration diagram for AstrometryDriver:

Public Types
enum	{ ASTROMETRY_SETTINGS_BINARY, ASTROMETRY_SETTINGS_OPTIONS }

enum	{ ASTROMETRY_RESULTS_PIXSCALE, ASTROMETRY_RESULTS_ORIENTATION, ASTROMETRY_RESULTS_RA, ASTROMETRY_RESULTS_DE, ASTROMETRY_RESULTS_PARITY }

Public Types inherited from INDI::BaseDevice
enum	INDI_ERROR { INDI_DEVICE_NOT_FOUND = -1, INDI_PROPERTY_INVALID = -2, INDI_PROPERTY_DUPLICATED = -3, INDI_DISPATCH_ERROR = -4, INDI_DEVICE_NOT_FOUND = -1, INDI_PROPERTY_INVALID = -2, INDI_PROPERTY_DUPLICATED = -3, INDI_DISPATCH_ERROR = -4 }

enum	DRIVER_INTERFACE { GENERAL_INTERFACE = 0, TELESCOPE_INTERFACE = (1 << 0), CCD_INTERFACE = (1 << 1), GUIDER_INTERFACE = (1 << 2), FOCUSER_INTERFACE = (1 << 3), FILTER_INTERFACE = (1 << 4), DOME_INTERFACE = (1 << 5), GPS_INTERFACE = (1 << 6), WEATHER_INTERFACE = (1 << 7), AO_INTERFACE = (1 << 8), DUSTCAP_INTERFACE = (1 << 9), LIGHTBOX_INTERFACE = (1 << 10), DETECTOR_INTERFACE = (1 << 11), ROTATOR_INTERFACE = (1 << 12), SPECTROGRAPH_INTERFACE = (1 << 13), AUX_INTERFACE = (1 << 15), GENERAL_INTERFACE = 0, TELESCOPE_INTERFACE = (1 << 0), CCD_INTERFACE = (1 << 1), GUIDER_INTERFACE = (1 << 2), FOCUSER_INTERFACE = (1 << 3), FILTER_INTERFACE = (1 << 4), DOME_INTERFACE = (1 << 5), GPS_INTERFACE = (1 << 6), WEATHER_INTERFACE = (1 << 7), AO_INTERFACE = (1 << 8), DUSTCAP_INTERFACE = (1 << 9), LIGHTBOX_INTERFACE = (1 << 10), DETECTOR_INTERFACE = (1 << 11), ROTATOR_INTERFACE = (1 << 12), SPECTROGRAPH_INTERFACE = (1 << 13), AUX_INTERFACE = (1 << 15) }
	The DRIVER_INTERFACE enum defines the class of devices the driver implements. More...

enum	INDI_ERROR { INDI_DEVICE_NOT_FOUND = -1, INDI_PROPERTY_INVALID = -2, INDI_PROPERTY_DUPLICATED = -3, INDI_DISPATCH_ERROR = -4, INDI_DEVICE_NOT_FOUND = -1, INDI_PROPERTY_INVALID = -2, INDI_PROPERTY_DUPLICATED = -3, INDI_DISPATCH_ERROR = -4 }

enum	DRIVER_INTERFACE { GENERAL_INTERFACE = 0, TELESCOPE_INTERFACE = (1 << 0), CCD_INTERFACE = (1 << 1), GUIDER_INTERFACE = (1 << 2), FOCUSER_INTERFACE = (1 << 3), FILTER_INTERFACE = (1 << 4), DOME_INTERFACE = (1 << 5), GPS_INTERFACE = (1 << 6), WEATHER_INTERFACE = (1 << 7), AO_INTERFACE = (1 << 8), DUSTCAP_INTERFACE = (1 << 9), LIGHTBOX_INTERFACE = (1 << 10), DETECTOR_INTERFACE = (1 << 11), ROTATOR_INTERFACE = (1 << 12), SPECTROGRAPH_INTERFACE = (1 << 13), AUX_INTERFACE = (1 << 15), GENERAL_INTERFACE = 0, TELESCOPE_INTERFACE = (1 << 0), CCD_INTERFACE = (1 << 1), GUIDER_INTERFACE = (1 << 2), FOCUSER_INTERFACE = (1 << 3), FILTER_INTERFACE = (1 << 4), DOME_INTERFACE = (1 << 5), GPS_INTERFACE = (1 << 6), WEATHER_INTERFACE = (1 << 7), AO_INTERFACE = (1 << 8), DUSTCAP_INTERFACE = (1 << 9), LIGHTBOX_INTERFACE = (1 << 10), DETECTOR_INTERFACE = (1 << 11), ROTATOR_INTERFACE = (1 << 12), SPECTROGRAPH_INTERFACE = (1 << 13), AUX_INTERFACE = (1 << 15) }
	The DRIVER_INTERFACE enum defines the class of devices the driver implements. More...

Public Member Functions
	AstrometryDriver ()

	~AstrometryDriver ()=default

virtual void	ISGetProperties (const char *dev)
	define the driver's properties to the client. More...

virtual bool	initProperties ()
	Initilize properties initial state and value. More...

virtual bool	updateProperties ()
	updateProperties is called whenever there is a change in the CONNECTION status of the driver. More...

virtual bool	ISNewText (const char dev, const char name, char texts[], char names[], int n)
	Process the client newSwitch command. More...

virtual bool	ISNewSwitch (const char dev, const char name, ISState states, char names[], int n)
	Process the client newSwitch command. More...

virtual bool	ISNewNumber (const char dev, const char name, double values[], char *names[], int n)
	Process the client newNumber command. More...

virtual bool	ISNewBLOB (const char dev, const char name, int sizes[], int blobsizes[], char blobs[], char formats[], char *names[], int n)
	Process the client newBLOB command. More...

virtual bool	ISSnoopDevice (XMLEle *root)
	Process a snoop event from INDI server. More...

Public Member Functions inherited from INDI::DefaultDevice
	DefaultDevice ()

virtual	~DefaultDevice ()

void	addAuxControls ()
	Add Debug, Simulation, and Configuration options to the driver. More...

void	addDebugControl ()
	Add Debug control to the driver. More...

void	addSimulationControl ()
	Add Simulation control to the driver. More...

void	addConfigurationControl ()
	Add Configuration control to the driver. More...

void	addPollPeriodControl ()
	Add Polling period control to the driver. More...

void	resetProperties ()
	Set all properties to IDLE state. More...

void	defineNumber (INumberVectorProperty *nvp)
	Define number vector to client & register it. More...

void	defineText (ITextVectorProperty *tvp)
	Define text vector to client & register it. More...

void	defineSwitch (ISwitchVectorProperty *svp)
	Define switch vector to client & register it. More...

void	defineLight (ILightVectorProperty *lvp)
	Define light vector to client & register it. More...

void	defineBLOB (IBLOBVectorProperty *bvp)
	Define BLOB vector to client & register it. More...

virtual bool	deleteProperty (const char *propertyName)
	Delete a property and unregister it. More...

virtual void	setConnected (bool status, IPState state=IPS_OK, const char *msg=nullptr)
	Set connection switch status in the client. More...

int	SetTimer (uint32_t ms)
	Set a timer to call the function TimerHit after ms milliseconds. More...

void	RemoveTimer (int id)
	Remove timer added with SetTimer. More...

virtual void	TimerHit ()
	Callback function to be called once SetTimer duration elapses. More...

virtual const char *	getDriverExec ()

virtual const char *	getDriverName ()

void	setVersion (uint16_t vMajor, uint16_t vMinor)
	Set driver version information to be defined in DRIVER_INFO property as vMajor.vMinor. More...

uint16_t	getMajorVersion ()

uint16_t	getMinorVersion ()

virtual uint16_t	getDriverInterface ()

void	setDriverInterface (uint16_t value)
	setInterface Set driver interface. More...

	DefaultDevice ()

virtual	~DefaultDevice ()

void	addAuxControls ()
	Add Debug, Simulation, and Configuration options to the driver. More...

void	addDebugControl ()
	Add Debug control to the driver. More...

void	addSimulationControl ()
	Add Simulation control to the driver. More...

void	addConfigurationControl ()
	Add Configuration control to the driver. More...

void	addPollPeriodControl ()
	Add Polling period control to the driver. More...

void	resetProperties ()
	Set all properties to IDLE state. More...

void	defineNumber (INumberVectorProperty *nvp)
	Define number vector to client & register it. More...

void	defineText (ITextVectorProperty *tvp)
	Define text vector to client & register it. More...

void	defineSwitch (ISwitchVectorProperty *svp)
	Define switch vector to client & register it. More...

void	defineLight (ILightVectorProperty *lvp)
	Define light vector to client & register it. More...

void	defineBLOB (IBLOBVectorProperty *bvp)
	Define BLOB vector to client & register it. More...

virtual bool	deleteProperty (const char *propertyName)
	Delete a property and unregister it. More...

virtual void	setConnected (bool status, IPState state=IPS_OK, const char *msg=nullptr)
	Set connection switch status in the client. More...

int	SetTimer (uint32_t ms)
	Set a timer to call the function TimerHit after ms milliseconds. More...

void	RemoveTimer (int id)
	Remove timer added with SetTimer. More...

virtual void	TimerHit ()
	Callback function to be called once SetTimer duration elapses. More...

virtual const char *	getDriverExec ()

virtual const char *	getDriverName ()

void	setVersion (uint16_t vMajor, uint16_t vMinor)
	Set driver version information to be defined in DRIVER_INFO property as vMajor.vMinor. More...

uint16_t	getMajorVersion ()

uint16_t	getMinorVersion ()

virtual uint16_t	getDriverInterface ()

void	setDriverInterface (uint16_t value)
	setInterface Set driver interface. More...

Public Member Functions inherited from INDI::BaseDevice
	BaseDevice ()

virtual	~BaseDevice ()

INumberVectorProperty *	getNumber (const char *name)

ITextVectorProperty *	getText (const char *name)

ISwitchVectorProperty *	getSwitch (const char *name)

ILightVectorProperty *	getLight (const char *name)

IBLOBVectorProperty *	getBLOB (const char *name)

IPState	getPropertyState (const char *name)

IPerm	getPropertyPermission (const char *name)

void	registerProperty (void *p, INDI_PROPERTY_TYPE type)

int	removeProperty (const char name, char errmsg)
	Remove a property. More...

void *	getRawProperty (const char *name, INDI_PROPERTY_TYPE type=INDI_UNKNOWN)
	Return a property and its type given its name. More...

INDI::Property *	getProperty (const char *name, INDI_PROPERTY_TYPE type=INDI_UNKNOWN)
	Return a property and its type given its name. More...

std::vector< INDI::Property * > *	getProperties ()
	Return a list of all properties in the device. More...

bool	buildSkeleton (const char *filename)
	Build driver properties from a skeleton file. More...

bool	isConnected ()

void	setDeviceName (const char *dev)
	Set the device name. More...

const char *	getDeviceName ()

void	addMessage (const std::string &msg)
	Add message to the driver's message queue. More...

void	checkMessage (XMLEle *root)

void	doMessage (XMLEle *msg)

std::string	messageQueue (int index) const

std::string	lastMessage ()

void	setMediator (INDI::BaseMediator *med)
	Set the driver's mediator to receive notification of news devices and updated property values. More...

INDI::BaseMediator *	getMediator ()

const char *	getDriverName ()

const char *	getDriverExec ()

const char *	getDriverVersion ()

	BaseDevice ()

virtual	~BaseDevice ()

INumberVectorProperty *	getNumber (const char *name)

ITextVectorProperty *	getText (const char *name)

ISwitchVectorProperty *	getSwitch (const char *name)

ILightVectorProperty *	getLight (const char *name)

IBLOBVectorProperty *	getBLOB (const char *name)

IPState	getPropertyState (const char *name)

IPerm	getPropertyPermission (const char *name)

void	registerProperty (void *p, INDI_PROPERTY_TYPE type)

int	removeProperty (const char name, char errmsg)
	Remove a property. More...

void *	getRawProperty (const char *name, INDI_PROPERTY_TYPE type=INDI_UNKNOWN)
	Return a property and its type given its name. More...

INDI::Property *	getProperty (const char *name, INDI_PROPERTY_TYPE type=INDI_UNKNOWN)
	Return a property and its type given its name. More...

std::vector< INDI::Property * > *	getProperties ()
	Return a list of all properties in the device. More...

bool	buildSkeleton (const char *filename)
	Build driver properties from a skeleton file. More...

bool	isConnected ()

void	setDeviceName (const char *dev)
	Set the device name. More...

const char *	getDeviceName ()

void	addMessage (const std::string &msg)
	Add message to the driver's message queue. More...

void	checkMessage (XMLEle *root)

void	doMessage (XMLEle *msg)

std::string	messageQueue (int index) const

std::string	lastMessage ()

void	setMediator (INDI::BaseMediator *med)
	Set the driver's mediator to receive notification of news devices and updated property values. More...

INDI::BaseMediator *	getMediator ()

const char *	getDriverName ()

const char *	getDriverExec ()

const char *	getDriverVersion ()

Static Public Member Functions
static void *	runSolverHelper (void *context)

Protected Types
enum	{ SOLVER_ENABLE, SOLVER_DISABLE }

Protected Member Functions
bool	Connect ()
	Connect to the device. More...

bool	Disconnect ()
	Disconnect from device. More...

const char *	getDefaultName ()

virtual bool	saveConfigItems (FILE *fp)
	saveConfigItems Save specific properties in the provide config file handler. More...

Protected Member Functions inherited from INDI::DefaultDevice
void	setDynamicPropertiesBehavior (bool defineEnabled, bool deleteEnabled)
	setDynamicPropertiesBehavior controls handling of dynamic properties. More...

virtual bool	loadConfig (bool silent=false, const char *property=nullptr)
	Load the last saved configuration file. More...

virtual bool	saveConfig (bool silent=false, const char *property=nullptr)
	Save the current properties in a configuration file. More...

virtual bool	saveAllConfigItems (FILE *fp)
	saveAllConfigItems Save all the drivers' properties in the configuration file More...

virtual bool	loadDefaultConfig ()
	Load the default configuration file. More...

void	setDebug (bool enable)
	Toggle driver debug status A driver can be more verbose if Debug option is enabled by the client. More...

void	setSimulation (bool enable)
	Toggle driver simulation status A driver can run in simulation mode if Simulation option is enabled by the client. More...

virtual void	debugTriggered (bool enable)
	Inform driver that the debug option was triggered. More...

virtual void	simulationTriggered (bool enable)
	Inform driver that the simulation option was triggered. More...

bool	isDebug ()

bool	isSimulation ()

void	registerConnection (Connection::Interface *newConnection)
	registerConnection Add new connection plugin to the existing connection pool. More...

bool	unRegisterConnection (Connection::Interface *existingConnection)
	unRegisterConnection Remove connection from existing pool More...

Connection::Interface *	getActiveConnection ()

void	setDefaultPollingPeriod (uint32_t period)

uint32_t	getPollingPeriod ()

void	setDynamicPropertiesBehavior (bool defineEnabled, bool deleteEnabled)
	setDynamicPropertiesBehavior controls handling of dynamic properties. More...

virtual bool	loadConfig (bool silent=false, const char *property=nullptr)
	Load the last saved configuration file. More...

virtual bool	saveConfig (bool silent=false, const char *property=nullptr)
	Save the current properties in a configuration file. More...

virtual bool	saveAllConfigItems (FILE *fp)
	saveAllConfigItems Save all the drivers' properties in the configuration file More...

virtual bool	loadDefaultConfig ()
	Load the default configuration file. More...

void	setDebug (bool enable)
	Toggle driver debug status A driver can be more verbose if Debug option is enabled by the client. More...

void	setSimulation (bool enable)
	Toggle driver simulation status A driver can run in simulation mode if Simulation option is enabled by the client. More...

virtual void	debugTriggered (bool enable)
	Inform driver that the debug option was triggered. More...

virtual void	simulationTriggered (bool enable)
	Inform driver that the simulation option was triggered. More...

bool	isDebug ()

bool	isSimulation ()

void	registerConnection (Connection::Interface *newConnection)
	registerConnection Add new connection plugin to the existing connection pool. More...

bool	unRegisterConnection (Connection::Interface *existingConnection)
	unRegisterConnection Remove connection from existing pool More...

Connection::Interface *	getActiveConnection ()

void	setDefaultPollingPeriod (uint32_t period)

uint32_t	getPollingPeriod ()

Protected Member Functions inherited from INDI::BaseDevice
int	buildProp (XMLEle root, char errmsg)
	Build a property given the supplied XML element (defXXX) More...

int	setValue (XMLEle root, char errmsg)
	handle SetXXX commands from client More...

int	setBLOB (IBLOBVectorProperty pp, XMLEle root, char *errmsg)
	Parse and store BLOB in the respective vector. More...

int	buildProp (XMLEle root, char errmsg)
	Build a property given the supplied XML element (defXXX) More...

int	setValue (XMLEle root, char errmsg)
	handle SetXXX commands from client More...

int	setBLOB (IBLOBVectorProperty pp, XMLEle root, char *errmsg)
	Parse and store BLOB in the respective vector. More...

Protected Attributes
ISwitch	SolverS [2]

ISwitchVectorProperty	SolverSP

IText	SolverSettingsT [2] {}

ITextVectorProperty	SolverSettingsTP

INumber	SolverResultN [5]

INumberVectorProperty	SolverResultNP

ITextVectorProperty	ActiveDeviceTP

IText	ActiveDeviceT [1] {}

IBLOBVectorProperty	SolverDataBP

IBLOB	SolverDataB [1]

IBLOB	CCDDataB [1]

IBLOBVectorProperty	CCDDataBP

Protected Attributes inherited from INDI::DefaultDevice
uint32_t	POLLMS = 1000
	Period in milliseconds to call TimerHit(). Default 1000 ms. More...

Private Member Functions
void	runSolver ()

bool	processBLOB (uint8_t *data, uint32_t size, uint32_t len)
	processBLOB Read blob FITS. More...

Private Attributes
pthread_t	solverThread

pthread_mutex_t	lock

Detailed Description

The AstrometryDriver class is an INDI driver frontend for astrometry.net.

There are two supported methods to solve an image:

Upload an image using the BLOB property.
Listen to uploaded BLOBs as emitted from a CCD driver. Set the CCD driver name to listen to in Options.

The solver settings should be set before running the solver in order to ensure correct and timely response from astrometry.net It is assumed that astrometry.net is property set-up in the same machine the driver is running along with the appropiate index files.

If the solver is successfull, the driver sets the solver results which include:

Pixel Scale (arcsec/pixel).
Orientation (E or W) degrees.
Center RA (J2000) Hours.
Center DE (J2000) Degrees.
Parity

Author: Jasem Mutlaq

Member Enumeration Documentation

◆ anonymous enum

anonymous enum

Enumerator
ASTROMETRY_SETTINGS_BINARY
ASTROMETRY_SETTINGS_OPTIONS

◆ anonymous enum

anonymous enum

Enumerator
ASTROMETRY_RESULTS_PIXSCALE
ASTROMETRY_RESULTS_ORIENTATION
ASTROMETRY_RESULTS_RA
ASTROMETRY_RESULTS_DE
ASTROMETRY_RESULTS_PARITY

◆ anonymous enum

anonymous enum

protected

Enumerator
SOLVER_ENABLE
SOLVER_DISABLE

Constructor & Destructor Documentation

◆ AstrometryDriver()

AstrometryDriver::AstrometryDriver ( )

◆ ~AstrometryDriver()

AstrometryDriver::~AstrometryDriver ( )

default

Member Function Documentation

◆ Connect()

bool AstrometryDriver::Connect ( )

protectedvirtual

Connect to the device.

INDI::DefaultDevice implementation connects to appropriate connection interface (Serial or TCP) governed by connectionMode. If connection is successful, it proceed to call Handshake() function to ensure communication with device is successful. For other communication interface, override the method in the child class implementation

Returns: True if connection is successful, false otherwise

Reimplemented from INDI::DefaultDevice.

◆ Disconnect()

bool AstrometryDriver::Disconnect ( )

protectedvirtual

Disconnect from device.

Returns: True if successful, false otherwise

Reimplemented from INDI::DefaultDevice.

◆ getDefaultName()

const char * AstrometryDriver::getDefaultName ( )

protectedvirtual

Returns: Default name of the device.

Implements INDI::DefaultDevice.

◆ initProperties()

bool AstrometryDriver::initProperties ( )

virtual

Initilize properties initial state and value.

The child class must implement this function.

Returns: True if initilization is successful, false otherwise.

Reimplemented from INDI::DefaultDevice.

◆ ISGetProperties()

void AstrometryDriver::ISGetProperties ( const char * dev )

virtual

define the driver's properties to the client.

Usually, only a minimum set of properties are defined to the client in this function if the device is in disconnected state. Those properties should be enough to enable the client to establish a connection to the device. In addition to CONNECT/DISCONNECT, such properties may include port name, IP address, etc. You should check if the device is already connected, and if this is true, then you must define the remainder of the the properties to the client in this function. Otherwise, the remainder of the driver's properties are defined to the client in updateProperties() function which is called when a client connects/disconnects from a device.

Parameters

dev	name of the device

Note: This function is called by the INDI framework, do not call it directly. See LX200 Generic driver for an example implementation

Reimplemented from INDI::DefaultDevice.

◆ ISNewBLOB()

bool AstrometryDriver::ISNewBLOB	(	const char *	dev,
		const char *	name,
		int	sizes[],
		int	blobsizes[],
		char *	blobs[],
		char *	formats[],
		char *	names[],
		int	n
	)

virtual

Process the client newBLOB command.

Note: This function is called by the INDI framework, do not call it directly.

Returns: True if any property was successfully processed, false otherwise.

Reimplemented from INDI::DefaultDevice.

◆ ISNewNumber()

bool AstrometryDriver::ISNewNumber	(	const char *	dev,
		const char *	name,
		double	values[],
		char *	names[],
		int	n
	)

virtual

Process the client newNumber command.

Note: This function is called by the INDI framework, do not call it directly.

Returns: True if any property was successfully processed, false otherwise.

Reimplemented from INDI::DefaultDevice.

◆ ISNewSwitch()

bool AstrometryDriver::ISNewSwitch	(	const char *	dev,
		const char *	name,
		ISState *	states,
		char *	names[],
		int	n
	)

virtual

Process the client newSwitch command.

Note: This function is called by the INDI framework, do not call it directly.

Returns: True if any property was successfully processed, false otherwise.

Reimplemented from INDI::DefaultDevice.

◆ ISNewText()

bool AstrometryDriver::ISNewText	(	const char *	dev,
		const char *	name,
		char *	texts[],
		char *	names[],
		int	n
	)

virtual

Process the client newSwitch command.

Note: This function is called by the INDI framework, do not call it directly.

Returns: True if any property was successfully processed, false otherwise.

Reimplemented from INDI::DefaultDevice.

◆ ISSnoopDevice()

bool AstrometryDriver::ISSnoopDevice ( XMLEle * root )

virtual

Process a snoop event from INDI server.

This function is called when a snooped property is updated in a snooped driver.

Note: This function is called by the INDI framework, do not call it directly.

Returns: True if any property was successfully processed, false otherwise.

Reimplemented from INDI::DefaultDevice.

◆ processBLOB()

bool AstrometryDriver::processBLOB	(	uint8_t *	data,
		uint32_t	size,
		uint32_t	len
	)

private

processBLOB Read blob FITS.

Uncompress if necessary, write to temporary file, and run solver against it.

Parameters

data	raw data FITS buffer
size	size of FITS data
len	size of raw data. If no compression is used then len = size. If compression is used, then len is the compressed buffer size and size is the uncompressed final valid data size.

Returns: True if blob buffer was processed correctly and solver started, false otherwise.

◆ runSolver()

void AstrometryDriver::runSolver ( )

private

◆ runSolverHelper()

void * AstrometryDriver::runSolverHelper ( void * context )

static

◆ saveConfigItems()

bool AstrometryDriver::saveConfigItems ( FILE * fp )

protectedvirtual

saveConfigItems Save specific properties in the provide config file handler.

Child class usually override this function to save their own properties and the base class saveConfigItems(fp) must be explicitly called by each child class. The Default Device saveConfigItems(fp) only save Debug properties options in the config file.

Parameters

fp	Pointer to config file handler

Returns: True if successful, false otherwise.

Reimplemented from INDI::DefaultDevice.

◆ updateProperties()

bool AstrometryDriver::updateProperties ( )

virtual

updateProperties is called whenever there is a change in the CONNECTION status of the driver.

This will enable the driver to react to changes of switching ON/OFF a device. For example, a driver may only define a set of properties after a device is connected, but not before.

Returns: True if update is successful, false otherwise.

Reimplemented from INDI::DefaultDevice.

Member Data Documentation

◆ ActiveDeviceT

IText AstrometryDriver::ActiveDeviceT[1] {}

protected

◆ ActiveDeviceTP

ITextVectorProperty AstrometryDriver::ActiveDeviceTP

protected

◆ CCDDataB

IBLOB AstrometryDriver::CCDDataB[1]

protected

◆ CCDDataBP

IBLOBVectorProperty AstrometryDriver::CCDDataBP

protected

◆ lock

pthread_mutex_t AstrometryDriver::lock

private

◆ SolverDataB

IBLOB AstrometryDriver::SolverDataB[1]

protected

◆ SolverDataBP

IBLOBVectorProperty AstrometryDriver::SolverDataBP

protected

◆ SolverResultN

INumber AstrometryDriver::SolverResultN[5]

protected

◆ SolverResultNP

INumberVectorProperty AstrometryDriver::SolverResultNP

protected

◆ SolverS

ISwitch AstrometryDriver::SolverS[2]

protected

◆ SolverSettingsT

IText AstrometryDriver::SolverSettingsT[2] {}

protected

◆ SolverSettingsTP

ITextVectorProperty AstrometryDriver::SolverSettingsTP

protected

◆ SolverSP

ISwitchVectorProperty AstrometryDriver::SolverSP

protected

◆ solverThread

pthread_t AstrometryDriver::solverThread

private

The documentation for this class was generated from the following files:

ln/3rdparty/src/indilib/indi-1.7.4/libindi/drivers/auxiliary/astrometrydriver.h
ln/3rdparty/src/indilib/indi-1.7.4/libindi/drivers/auxiliary/astrometrydriver.cpp

Public Types

Public Member Functions

Static Public Member Functions

Protected Types

Protected Member Functions

Protected Attributes

Private Member Functions

Private Attributes

Detailed Description

Member Enumeration Documentation

◆ anonymous enum

◆ anonymous enum

◆ anonymous enum

Constructor & Destructor Documentation

◆ AstrometryDriver()

◆ ~AstrometryDriver()

Member Function Documentation

◆ Connect()

◆ Disconnect()

◆ getDefaultName()

◆ initProperties()

◆ ISGetProperties()

◆ ISNewBLOB()

◆ ISNewNumber()

◆ ISNewSwitch()

◆ ISNewText()

◆ ISSnoopDevice()

◆ processBLOB()

◆ runSolver()

◆ runSolverHelper()

◆ saveConfigItems()

◆ updateProperties()

Member Data Documentation

◆ ActiveDeviceT

◆ ActiveDeviceTP

◆ CCDDataB

◆ CCDDataBP

◆ lock

◆ SolverDataB

◆ SolverDataBP

◆ SolverResultN

◆ SolverResultNP

◆ SolverS

◆ SolverSettingsT

◆ SolverSettingsTP

◆ SolverSP

◆ solverThread